Heat-insulating system of EKOSTYR is, thanks to its low bulk density and to its relatively high heat resistance and compressive strength, predetermined for heat-insulating systems used in building industry. In practice it is used for floor insulation of floor structures, building structures, roof structures and piping of various type, such as water piping, sewage piping, electrical distributions,…

     Heat-insulating system of EKOSTYR belongs to relatively low labour-consuming wet technological trades. It is applied right onto bearing structure of ceiling, roofing or right onto a floor structure. Its great advantage is in the fact that it does not need any flat adjusted basement and that it can ideally infill gaps in between e.g. piping. The mixture surface can be easily adjusted by grinding after its mature. Manipulation and treating of EKOSTYR is allowed at temperatures down to + 5°C.

	Physical and chemical properties of EKOSTYR material, class 300l Min. compression strength 0,50 MPa Bulk density, natural humidity 333,0 kg/m3 Bulk density, dry state 303,8 kg/m3 Thermal conductance index 0,089 (W.m-1.K-1) Diffusion resistance factor 7,069 Index of steam diffusion 0,0266 .10 9 (s) Combustibility grade B (non easy combustible)

	Dosing of ekostyrconcrete per1m3 Bulk density (kg/m3) 200 350 500 700 900 Ekostyren (m3) 1,285 1,285 1,200 1,100 0,950 Cement (kg) 130 220 280 280 270 Sand of  0-4 mm (kg) 30 40 100 330 510 Water (litre) 75 90 120 130 140 Compression strength (MPa) 0,2 0,3 0,5 0,9 1,8 Thermal conductance Index (W/mK) 0,057 0,086 0,140 0,177 0,235 Combustibility grade (stupeň) B B B A A Hygienic harmless Suitable for use in interiors